REDWIRETechnologyNews

News you can use from leading suppliers

控制你的数据与这个方便的设备
December 11, 2014 by Durham Instruments

你有控制你的测量数据吗?港口able data recorders are one way for users to gain total control of measurement data — and it’s easy. The GEN3i High-Speed, Portable Data Recorder,…

Small sensor solves big production line problem
December 11, 2014 by Keyence Canada

公司一直使用半自动process for its product assembly wanted to move towards a fully automated process to speed up production, eliminate errors and reduce the amount of human…

Are your machines as productive as they can be? This tool can find out.
December 11, 2014 by Memex Automation Inc.

“If you can measure it, then you can manage it.” That’s the motto of Burlington, Ont.-based Memex Automation, a leader in the connection, monitoring and management of machines, sensors and processes in manufacturing.…

Achieving food quality through high compressed air quality
December 10, 2014 by Festo Inc

Great care must always be taken when compressed air comes into contact with food, because compressed air is not clean by nature. Extremely strict requirements are stipulated for compressed air quality in the…

Six must-have actuator features that lower the cost of ownership
December 10, 2014 by Thermo-Kinetics Measurement & Control Ltd.

Every manufacturer concerned with the bottom line is looking for ways to improve efficiency, reduce waste and lower the cost of ownership of their tools, equipment and products. Utilizing actuators for precise positioning…

Myth busting: A look at some of the misconceptions around robotic welding
December 10, 2014 by Lincoln Electric (Canada)

Automated welding represents an opportunity for improvement to many in the industry, but not everyone is convinced. Part of this unease stems from misconceptions about the process. Lincoln Electric addressed some of these…

A cable for every robotic application
December 10, 2014 by Lapp Canada Inc

Robots are being increasingly used in a variety of applications in many industries. They’re a crucial element of complex production processes. This means that robot technology is a dynamic area for development. Cables…

Plant reduces shutdowns 90 per cent with automation system
December 10, 2014 by Untitled

Ripon Cogeneration, which helps supply energy to homes and businesses throughout most of northern and central California, achieved unprecedented plant performance — including a 30 per cent reduction in startup time — by…

Conveyor system helps company take out the trash
December 9, 2014 by Wecon Systems Ltd.

Wecon Services was invited to be part of a large newsprint system being installed in the GTA. The customer — Ferag Americas, a European manufacturer and integrator of newsprint equipment — was tasked…

Custom fabricator takes on modular plant fabrication projects
December 9, 2014 by Alps Welding Ltd

For 40 years, Alps Welding has been the fabricator of choice for many companies across North America for their custom process equipment. But over the last four decades, the Woodbridge, Ont.-based company has…

The finishing touch: Essential features for stainless steel tubes
December 9, 2014 by Wainbee Limited

If you’re looking to complete your tube fittings system, don’t forget about stainless steel coiled or straight length tubing. It’s a necessary component that will help reduce the risk of leakage in your…

Springs & Things Inc., welcomes latest technology to shop floor
December 9, 2014 by Springs & Things Inc

A new addition is coming to Springs & Things’ Mississauga, Ont.-based manufacturing plant this month, and bringing with it additional capability and capacity. The CNC spring and wire form making machine, Model HTC-10XU,…

Six features to look for in a boiler system
December 9, 2014 by Miura Canada Co. Ltd.

Many industrial applications use boilers to produce steam or hot water. Forward-thinking companies that want to conserve oil and gas resources while saving money and reducing emissions should look for these six features…

EXAIR’s reversible drum vacs are now CE compliant
December 9, 2014 by Exair LLC

After undergoing rigorous testing by an independent laboratory, EXAIR’s reversible drum vacs have been proven to meet the stringent requirements of the European Union in order to be marked as CE compliant. The…

An intro to mass flow sensors — and what they do
December 8, 2014 by Durham Instruments

Almost every modern process and machine that uses gas and/or liquid has a flow meter with a flow sensor incorporated. A flow sensor is a device that measures the rate of flow of…

Ontario company brings you metric fasteners — fast
December 8, 2014 by Advance Fasteners Ltd

Metric fasteners are used in a variety of industrial applications — from HVAC and construction to electrical and commercial product manufacturing. They’re quite possibly a necessary component of your industrial application. Where do…

Wire bending machinery: A look at some of the options
December 5, 2014 by Rotem Industrial Products Inc

Canadian wiring industries require high-quality wire bending machinery, such as CNC wire benders and a straighten machine, to stay ahead of the competition. That’s why Etobicoke, Ont.-based Rotem Industrial Products has partnered with…

Company learns how to lift and handle boxes — the safe way
December 5, 2014 by Engineered Lifting Systems & Equipment Inc.

Engineered Lifting Systems & Equipment Inc. (ELS) has been providing standard and custom overhead material lifting systems and equipment on time and on budget since the company was founded in 1971. So when…

Enhance performance of fluid power systems with accumulators
December 5, 2014 by York Fluid Controls Ltd

Accumulators are storage vessels that hold fluid under pressure, and are commonly used in fluid power systems to store fluid as energy to be released on demand. They are also used to eliminate…

A solution for measuring — not calculating — greenhouse gases
December 4, 2014 by Sick Ltd.

If you are required to report your greenhouse gas emissions, or need precise calculation of greenhouse gas loads within the framework of an emission trading or pollution tax system, SICK, a producer of…

OEM delivers high-performance motion solution in small footprint
December 4, 2014 by Untitled

Microbore tubing is an essential tool in modern medicine. As its name implies, the plastic tubing is tiny in diameter. It’s also flexible and durable — qualities that make it indispensable for treating,…

Cross-dock system grows as business increases for logistics provider
December 4, 2014 by Wecon Systems Ltd.

Vitran Logistics was approached by a large Canadian grocery chain to provide distribution for the launch of a new line of products into their numerous retail outlets throughout Ontario. The plan was to…

Energy-efficient boilers work miracles for Saint Arnold Brewing Company
December 4, 2014 by Miura Canada Co. Ltd.

Saint Arnold Brewing Company co-founder Brock Wagner knew that his growing craft brewery's move to a 104,000-square-foot building in Houston would require a new steam boiler system. Saint Arnold's original fire-tube boiler was…

Under pressure: A look at applications for pressure, vacuum and leak-testing systems
December 3, 2014 by Wainbee Limited

Pressure and leak testing are a must for manufacturers who want to produce quality products. Pressure, vacuum and leak-testing systems for high-pressure applications are, in fact, some of the products offered by Mississauga,…

Lapp cables cut costs in production of flow measurement devices
December 3, 2014 by Lapp Canada Inc

Badger Meter Europa GmbH in Neuffen, Germany is the market leader in the area of magnetic-inductive measuring devices. Just like everywhere in the industry, Badger is under enormous pressure to reduce costs. And…

Eight reasons to consider Exergen D-Series infrared thermometers
December 2, 2014 by Mod-Tronic Instruments Ltd.

Exergen D-Series infrared (IR) thermometers are an entirely different type of instrument than conventional temperature measuring devices. Designed specifically for the highest possible accuracy, it is the only infrared instrument that can be…

Sensor solutions for alternative energy applications
December 2, 2014 by Durham Instruments

Sensors are at the heart of many alternative energy applications. Measurement Specialties (MEAS) designs and manufactures sensors that measure pressure/force, position, vibration, temperature, humidity, torque, fluid properties and perimeter/penetration. The company’s sensors are…

What to look for in a plasma cutting machine: Part 2
December 2, 2014 by Lincoln Electric (Canada)

You’re in the market for a plasma cutting machine, but you don’t know where to start. You’re not alone. Lincoln Electric has compiled this list of factors to consider when making a buying…

How to achieve high speeds during production
December 1, 2014 by Untitled

Many industries across the world have the need for speed — high speed. Companies need to get more done in less time. How do they achieve increased productivity? Material handling equipment plays a…

Food manufacturer’s vision of high-speed inspection comes to life
December 1, 2014 by Keyence Canada

For Nutrition & Santé, a maker of organic and health foods, quality is a big factor in the company’s success. But like most manufacturers, speed is also important — getting product to the…

Subscribe
Free REDWIRE e-newsletter Post your own REDWIRE news